RFC826 — An Ethernet Address Resolution Protocol: Or Converting Network Protocol Addresses to 48.bit Ethernet Address for Transmission on Ethernet Hardware
RFC826: An Ethernet Address Resolution Protocol: Or Converting Network Protocol Addresses to 48.bit Ethernet Address for Transmission on Ethernet Hardware
IETF Request for Comments
| Status | INTERNET STANDARD |
| Publication status | INTERNET STANDARD |
| Published | November 1982 |
| Stream | Legacy |
| Obsoletes | — |
| Obsoleted by | — |
| Updated by | RFC5227, RFC5494 |
Abstract
The purpose of this RFC is to present a method of Converting Protocol Addresses (e.g., IP addresses) to Local Network Addresses (e.g., Ethernet addresses). This is an issue of general concern in the ARPA Internet Community at this time. The method proposed here is presented for your consideration and comment. This is not the specification of an Internet Standard.
Official sources
- Info page: https://www.rfc-editor.org/info/rfc826
- Full text: https://www.rfc-editor.org/rfc/rfc826.txt
- HTML: https://www.rfc-editor.org/rfc/rfc826.html
Abstract and metadata are reproduced from the public RFC index; the full text is linked, not copied.